Technical Specifications / Rev 2026.1

KST-HHM-ODO Meter

Reads dissolved oxygen in the tank or the line, so you can see what the system changed. Optical fluorescence-quenching sensor.

To size your equipment
Measurement range, sampling points, handheld or inline use, the water source and how you log readings.

Sensor Performance

Measurement PrincipleOptical Fluorescence Quenching
Range0 - 50 mg/L (0 - 500% Saturation)
Resolution0.01 mg/L
Response Time< 30 Seconds
Temp Range0 - 50°C

Scroll horizontally to compare columns.

Accuracy Specifications

Concentration RangeAccuracy
0 - 20 mg/L±1% or ±0.2 mg/L
> 20 mg/L±5% or ±0.6 mg/L

Scroll horizontally to compare columns.

Hardware Specs

Body MaterialTitanium Alloy
Power9-24V DC (< 0.1W) / 18650 Batteries
OutputRS-485 (Modbus RTU)
Max PressureUp to 6 bar

Scroll horizontally to compare columns.

Engineering Note: Calibrate in air (100% saturation) once per week for best accuracy.
Kairospace KST-HHM-ODO Meter
Specify This Unit

Measure the delta yourself

0 to 50 mg/L at 0.01 mg/L resolution, ±1% below 20 mg/L, with RS-485 Modbus RTU output so readings land in your logger instead of a notebook. To quote one, we need these five things.

  • RangeThe dissolved-oxygen range you expect, in mg/L.
  • Sampling pointsHow many points you read, which sets the number of probes.
  • Handheld or inlinePortable checks, or a probe fixed on the line.
  • Water sourceWell, municipal, surface or process water, with temperature and line pressure (up to 6 bar).
  • LoggingManual notes, or an RS-485 Modbus RTU logger.

Values marked as reference on this page are confirmed by engineering in the quote.

An engineer replies within 48 hours, with a proposal or with the questions we need to write one.